Installation
The mechanical components of the BioCompact® C system are set up in the basin. Then, the electronic control system and sensors are installed. After connecting the BioCompact® unit to influent and effluent pipes and to a source of electricity, the system is ready for operation.
Maintenance
Ordinary maintenance includes a monthly check of the activated sludge’s concentration and a bimonthly cleaning of the system’s sensors. The frequency of discarding accumulated waste (non-biodegradable material, sand, and excess sludge) largely depends on the influent quality, and thus, on the habits of the population connected to the treatment system.
Dimensions
| Type | Capacity | length (m) | width (m) | depth (m) | flow (m3/d) |
|---|---|---|---|---|---|
| C500 | Population: 500 | 12.5 | 6.0 | 4.0 | 75 |
| C750 | Population: 750 | 12.0 | 7.0 | 4.5 | 150 |
| C1000 | Population: 1,000 | 13.5 | 8.0 | 5.0 | 200 |
| C1500 | Population: 1,500 | 15.5 | 9.0 | 5.5 | 300 |
| C2000 | Population: 2,000 | 17.5 | 10.0 | 4.0 | 400 |
| C2500 | Population: 2,500 | 19.5 | 11.0 | 6.0 | 500 |
| C3000 | Population: 3,000 | 18.0 | 15.5 | 5.5 | 600 |
| C4000 | Population: 4,000 | 20.0 | 17.5 | 6.0 | 800 |
| C5000 | Population: 5,000 | 22.0 | 19.5 | 6.0 | 1,000 |